Brother tintes un tonera kasetnes, lentes un termodrukas uzlīmes Nodrošiniet savu ierīču nevainojamu darbību ar oriģinālām tintes un tonera kasetnēm, lentēm un termodrukas uzlīmēm, augstākās kvalitātes papīru un ātri nomaināmām rezerves daļām. Apskatīt visus izejmateriālus
Drukas pārvaldības risinājumi (MPS) Uzziniet par ieguvumiem, izvēloties Brother drukas pārvaldības risinājumus Uzzināt vairāk
Advanced Functions (for Administrators) (2) I cannot use Gmail for Email functions (such as Scan-to-Email) and Internet Fax (I-Fax) Protect your Brother machine against unauthorised access over the network
Copy (4) How do I clean white or black spots on printed documents? How do I clear vertical lines or streaks that appear on my copies? Make copies using my Brother machine. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7).
Error Messages (28) "MFC is Busy" or "Connection Fail" error message appears. "System error incurred in external ink module EZText.g32. The OCR server is unable to process the document". appears whenscanning to OCR from ScanSoft™ PaperPort™ 11SE, using Windows XP Service Pack 2 (SP2). "Offline" appears on the Status Monitor. I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I configured the "IP Config" method of the machine to "Auto" to assign an IP address automatically, however it was changed to"Static" unexpectedly. I get an error message that indicates IP address is not unique, or a document is printed out by themachine I didn't expected. I don't think I got the full yield from my high-yield toner cartridge but the message "Toner Life End" or"Replace Toner" is displayed on the machine or the LED is on or flashing. I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner"/ "Toner Life End" or the Toner LED is still on or flashing. I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unitwith a new one. I'm trying to install the driver with network settings, but the installation wizard is not able to locate the Brother machineon my network, I'm getting the message "No devices could be found over the network". I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". My Antivirus Software gives a warning message during the installation of Web BRAdmin. The error message "[model name] cannot be found. ... (CC3-202-03031b02)" appears when scanning a document usingControlCenter3 on Windows 7 with the USB connection. The Error message "A file required cannot be found.(CC035)" appears when I click the "Remote Setup" or"Quick-Dial" button in ControlCenter2. (For Macintosh) The error message "An error occurred during the installation. ... . IS015- GetOsVersion - 1" appears wheninstalling the Full Driver & Software Packages for Windows 7 downloaded from the "Download" section. The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The error message "IS052 InstallNetworkDriver" appears when installing the MFL-Pro Suite from the CD-ROM or the FullDriver & Software Package is downloaded from the "Downloads" section. The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device). The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x. What does "COMM.ERROR" on the LCD display mean? When I install the drivers, Norton AntiVirus displays a Security Alert that a medium risk application "[file name].exe isattempting to connect to a DNS server". When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PCscreen. What do I do? When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display. When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When I try to scan using ControlCenter4 or ControlCenter3 for Windows, I receive the error message "Error CC3-202","Error CC4-202", "Error CC3-205" or "Error CC4-205". When my PC comes out of Standby or hibernate mode the message "No Device" appears and the Status Monitor is greyed out, usingWindows® XP/XP Professional x64 Edition. When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". Why does my machine display "Awaiting Redial"? Vairāk
Fax (33) Can I confirm that the FAX was sent correctly? Can I reduce the size of a received fax to fit the size of the paper in the Brother machine? Can I set my Brother machine to forward the faxes I receive to another location? Cancel a fax job waiting in my Brother machine's memory. Cancel a fax that is currently being sent from my Brother machine. Change or delete an existing One Touch or Speed Dial number. Changes to the contents stored in the address book do not become effective in the stored speed dial numbers in Windows. ControlCenter3 displays a blank screen at startup (Windows) Do I need a telephone line to send and receive faxes with my Brother machine? How do I clean white or black spots on printed documents? How do I use my Outlook contacts with my Brother PC-Fax software? I am experiencing problems sending a fax, what can I do? I am having a problem receiving faxes. I cannot find the Address Book menu in the Fax Settings or Fax section in a Web Browser or the Remote Setup Program. I cannot send a fax using PC-FAX (Windows 10) I cannot use Gmail for Email functions (such as Scan-to-Email) and Internet Fax (I-Fax) I installed the Full Driver & Software Package, but some applications were not installed. (For Windows 10) I want to use a name from my Windows® 2000/XP address book to send a FAX. The address book is stored on a network share and when Itry to access the address book it will not open. I'm using Voice Over Internet Protocol (VoIP) and am having problems receiving faxes. I'm using Voice Over Internet Protocol (VoIP) and am having problems sending faxes. Send a fax Send a PC-FAX Send the same fax to more than one number at a time. (Broadcasting) Set up a Group for Broadcasting faxes. Store numbers on my Brother machine for easy dialling. The message "Poor Line Condition" or "NG" appears on the Transmission Verification Report when I try to send a fax. The rainbow cursor keeps spinning when I click on Copy/PC-FAX in ControlCenter2 (For Mac OS X 10.7). What is Distinctive Ring and how do I program it? When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards? Which receive mode should I select? Why are the faxes I send always received with a black vertical line down the page? Why doesn't the image print on my Transmission Verification Report? Why doesn't the machine answer when receiving a call? Vairāk
Linux (48) All print jobs are aborted and nothing is printed. (Linux) Can I use my Brother printer with a 64 bit Linux distribution? (Linux) Command List of brscan. (Linux) Configure and use the Scan Key Tool (Linux) Configure the Scan to Email Feature (Linux) Delete a network scanner entry. (Linux) Firewall port requirements of the Scan Key Tool (Linux) How to use Scan-key-tool features. (Scan-to-File, Scan-to-Image or Scan-to E-mail) (Linux) I am unable to print from a client PC to a printer on a print server. (Linux) I cannot install Brother drivers on Debian 10 (Linux) I cannot install the driver when using the Driver Install Tool. (Linux) I cannot install the Linux printer driver in Fedora 33 or later. (Linux) I cannot install the LPD/LPRng driver and get a message that LPD does not exist. (Linux) I cannot scan from my Brother machine in Ubuntu 16.10 (Linux) I cannot scan when using SELinux (Security-Enhanced Linux) I cannot scan with brscan, brscan2, or brscan3 via USB (Linux) I get the "Filter "brlpdwrapper[model name]" for printer "[model name]" not available: No such file ordirectory" error on Gentoo (Linux) I installed scan-key-tool, but it does not work. (Linux) I want to print using CUPS while keeping SELinux enabled. (Linux) I'm using a Debian based distribution (e.g. Ubuntu, Kubuntu etc). When installing the CUPS Wrapper driver, I get the followingerror message: "/usr/local/Brother/cupswrapper/cupswrapper[model name]: No such file or directory". (Linux) I'm using Fedora 28 or later. I cannot scan from my Brother Machine or it says that it cannot find the Brother Machine. (Linux) I'm using FreeBSD. Do you have a driver for FreeBSD? (Linux) I'm using openSUSE 11.3. I cannot print to my Brother Machine. (Linux) I'm using SuSE 11.2. I cannot print to Brother monochrome machines. (Linux) I'm using Ubuntu 11.10 or higher. I cannot scan from my Brother Machine. (Linux) I'm using Ubuntu 8.04 or greater. I have installed the drivers, but I am still unable to print. (Linux) Large characters are printed incorrectly. (Linux) My machine prints 2-sided when I select 1-sided printing in the driver (Linux) Paper size settings are unavailable when I print from OpenOffice (Linux) Pre-Required Procedures (Linux) Print command (cupswrapper) (Linux) Print command (LPR) (Linux) Scan using XSane or GIMP (Linux) Send a fax using PC-FAX with LPD/LPRng (Linux) The downloaded driver's name is different from my machine's name. (Linux) The driver installation finished successfully but I cannot print. (Linux) The driver installation was successful but I cannot print on Redhat, Fedora, or CentOS (Linux) The scan key does not work after reconnecting the USB cable or rebooting my machine (openSUSE 11.4) (Linux) To install the printer driver easily using a tool. (Linux) Uninstall printer drivers (Linux) Uninstall Scan-key-tool. (Linux) Uninstall the scanner driver. (Linux) What driver package format is supported by my Linux distribution? When I scan multiple page documents using the ADF, all pages are fed, but only page 1 shows in XSANE. (Linux) When I try to send a PC-FAX, the paper is printed out instead of sending the FAX. (Linux) When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I cannotselect anything except "scan to FTP". (Linux) When printing with monochrome laser printer, the print position shifts. (Linux) When scanning I receive the error "Failed to start scanner : Invalid argument". (Linux) Vairāk
Mobile (24) A margin appears on the right side of the scanned document when using the Brother iPrint&Scan application on my Android™mobile device. Can I print all PDF formats from my device (Android™) using the Brother iPrint&Scan? Can I print from and scan to iPhone, iPod Touch and iPad? Can I print from or scan to Android™ Smartphone? Can I select paper trays from my device (Android™) using the Brother iPrint&Scan? Can I select paper trays from my device (iPhone, iPod touch and iPad) using the Brother iPrint&Scan? Can I use AirPrint with my Brother machine? I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later). I cannot view scanned images that I saved to iCloud from iPhone / iPod touch or iPad using Brother iPrint&Scan. Print a web page from Brother iPrint&Scan when using an iPhone, iPod touch and iPad. Print data from the Clipboard in Brother iPrint&Scan when using an iPhone, iPod touch and iPad. Print PDF files or documents from the Brother iPrint&Scan application when using Windows Phone. Print Photos or Documents from the Brother iPrint&Scan application when using an iPhone, iPod touch and iPad. Printing documents from Brother iPrint&Scan when using an Android™ mobile device. Scan from the Brother iPrint&Scan application using your iOS supported devices including iPhone, iPad and iPod touch. Scan from the Brother iPrint&Scan application using Windows Phone. Scanned documents are black when I view them in Brother Image Viewer (Android™) The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device). The scanned documents in my Android™ mobile device are not displayed in the documents list of the Brother Image Viewerapplication. Unable to print or scan when using Brother iPrint&Scan from my Android™ mobile device. Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device. What is Brother iPrint&Scan? Which connection can I use to print from my device (Android™) using the Brother iPrint&Scan? Which connection can I use to print from my device (iPhone, iPod touch, iPad) using the Brother iPrint&Scan? Vairāk
Others (2) I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine. The keys on the control panel do not respond.
Paper Feed / Paper Jam (6) How do I clear paper jams at the back of the machine? How do I clear paper jams inside the drum unit and toner cartridge assembly? How do I clear paper jams inside the machine? My Brother machine misfeeds paper. Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feedingpaper. How can I reduce the time it takes to start feeding paper? The paper is skewed when it's printed.
Print (42) Can I print all PDF formats from my device (Android™) using the Brother iPrint&Scan? Can I print from and scan to iPhone, iPod Touch and iPad? Can I print from or scan to Android™ Smartphone? Can I select paper trays from my device (Android™) using the Brother iPrint&Scan? Can I select paper trays from my device (iPhone, iPod touch and iPad) using the Brother iPrint&Scan? Cannot print after a Windows 10 update (June 2020) Change the printer driver settings (Windows / macOS) Delete print jobs from the print queue. How do I clean white or black spots on printed documents? I am sharing my Brother machine from my Windows XP computer and other Windows users are not able to print. I am using Windows. When I print a document, the printed page is blank. What should I do? I cannot print from my computer via USB. I cannot print using my Brother machine on a wired network. (Windows / macOS) I cannot print using my Brother machine on a wireless network (Mac) I cannot print using my Brother machine on a wireless network (Windows) I installed drivers from the bundled CD-ROM but I cannot print. (Mac OS X 10.5 or greater) I installed the Full Driver & Software Package, but some applications were not installed. (For Windows 10) I'm printing from Microsoft PowerPoint 2003 but it is not using the settings I select in the Universal Printer Driver. (ForWindows XP) My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021) Print a web page from Brother iPrint&Scan when using an iPhone, iPod touch and iPad. Print data from the Clipboard in Brother iPrint&Scan when using an iPhone, iPod touch and iPad. Print PDF files or documents from the Brother iPrint&Scan application when using Windows Phone. Print Photos or Documents from the Brother iPrint&Scan application when using an iPhone, iPod touch and iPad. Printing documents from Brother iPrint&Scan when using an Android™ mobile device. Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feedingpaper. How can I reduce the time it takes to start feeding paper? Some characters are missing when printing PDF files from Adobe® Acrobat® /Adobe® Acrobat® Reader® / Adobe® Reader®. What can I do to correct this? The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater) The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device). The paper is skewed when it's printed. The printer status is Offline or Paused. The printout is out of alignment or the size of the printed document is reduced when printing the document from Microsoft Word2010. The Universal Printer Driver searches for the Brother devices on a single network even though my computer connects to multiplenetworks. (For Windows users) Unable to print or scan when using Brother iPrint&Scan from my Android™ mobile device. Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device. Use the Universal Printer Driver for BR-Script. (PostScript language emulation) Use the Universal Printer Driver for PCL When I print a document as a booklet from Microsoft Office 2003 or later, a drawing object does not position correctly on theprinted page. (For Windows BR-Script Printer Drivers users) When I print from Outlook/ Outlook Express or Internet Explorer, the page does not print as expected. For example, theright or left hand portion of the page is blank or it prints on a separate piece of paper. When I print from PowerPoint using the 2 in 1 feature, some of the borders around the document are not printed or lines areprinted that shouldn't be there. When I try to scan a document using ScanSoft™ PaperPort™ 11SE, I can not scan from the ADF (automatic document feeder)with WIA driver. Which connection can I use to print from my device (Android™) using the Brother iPrint&Scan? Which connection can I use to print from my device (iPhone, iPod touch, iPad) using the Brother iPrint&Scan? Vairāk
Scan (62) "ControlCenter needs to be updated." - macOS 10.15 Catalina A margin appears on the right side of the scanned document when using the Brother iPrint&Scan application on my Android™mobile device. Can I print from and scan to iPhone, iPod Touch and iPad? Can I print from or scan to Android™ Smartphone? Can I view or edit documents on my Android™ mobile device that were scanned from my Brother machine? Configure or change the settings of the ControlCenter 2 or 3 scanning options ControlCenter3 displays a blank screen at startup (Windows) How do I scan a document from the Windows Vista™ Photo Gallery? How do I scan an image and insert it into an Office 2007 application using Windows Vista/Windows 7 How do I start the Scanner and Camera Wizard in Windows Vista/ Windows 7? I am sharing my Brother machine. I can print but cannot scan. I am trying to use a Brother driver from the CD supplied with the machine or downloaded from the Internet, and I cannot scan fromWindows Server 2003, Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. I can print but cannot scan via network. (For Mac) I can print but cannot scan via network. (For Macintosh) I can print but cannot scan via network. (For Windows) I can print but cannot scan via network. (For Windows) I cannot find the destination computer on the network when I try to scan a document using the machine's Scan key or controlpanel. I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X) I cannot scan via USB. (Mac OS X) I cannot use Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command lineargument is invalid" appears. What can I do? I cannot use the Scan to E-mail with ControlCenter3 after installing Office 2010. I installed the Full Driver & Software Package, but some applications were not installed. (For Windows 10) I'm using Mac OS X 10.5. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Mac OS X 10.6.x. The network scanning feature does not work when pressing the scan key on the control panel of myBrother machine. I'm using Windows. What format are the attachments when a document is scanned to e-mail and is a special viewer needed? I'm unable to scan from Corel® Paint Shop Pro® X using the WIA driver, using Windows XP Professional x64 Edition/Windows Vista™ 64-bit edition. I'm using Windows. When I try to Scan to E-mail I get an error saying "the command line argument is not valid. Verify the switchyou are using". Locate files scanned with ControlCenter3 (For Windows) Open "Scanners and Cameras" and Properties. Scan a document from a Windows Vista application Scan a document from a Windows XP application Scan a document in Mac OS X 10.6. Scan a document in Mac OS X 10.7. Scan a document in OS X 10.8 / macOS 10.12 - 10.15. Scan a document in Windows 8 and Windows 10. Scan a document into ScanSoft™ PaperPort™ 11SE Scan a document using "Scanner and Camera Wizard" in Windows XP Scan an image and insert it in a Windows XP application Scan and save a document in PDF format (Scan to File) Scan from the Brother iPrint&Scan application using your iOS supported devices including iPhone, iPad and iPod touch. Scan from the Brother iPrint&Scan application using Windows Phone. Scan multiple pages into one file instead of each scan being saved as a separate file. Scanned documents are black when I view them in Brother Image Viewer (Android™) The error message "[model name] cannot be found. ... (CC3-202-03031b02)" appears when scanning a document usingControlCenter3 on Windows 7 with the USB connection. The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device). The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows) The scanned image is blurred, garbled, or distorted when using ControlCenter2 or the SCAN key on my Brother machine. (For Mac OS X10.5) Unable to print or scan when using Brother iPrint&Scan from my Android™ mobile device. Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device. Use the Device Selector to configure your Brother machine’s scanner function (Mac) When I scan a document using ControlCenter, the scanned file size is too big. When I scan the document using ScanSoft™ PaperPort™ 11 SE , the bottom of the document is cut off. When I try to OCR into WordPad using ScanSoft™ PaperPort™ 11SE with OCR or Brother ControlCenter3, the text comesout as gibberish. This started after I installed Windows XP Service Pack 2 (SP2). When I try to scan a document using ScanSoft™ PaperPort™ 11SE, I can not scan from the ADF (automatic document feeder)with WIA driver. When I try to scan the document, the scanner application crashes. (OS X 10.11) When I try to scan to OCR I get the message "This feature is not available because there is no OCR Softwareinstalled" When I try to scan using ControlCenter4 or ControlCenter3 for Windows, I receive the error message "Error CC3-202","Error CC4-202", "Error CC3-205" or "Error CC4-205". When scanning to OCR from Brother ControlCenter3, the OCR application doesn't launch. I have Windows XP Service Pack 2(SP2) installed. What should I do? Which connection can I use to print from my device (Android™) using the Brother iPrint&Scan? Which connection can I use to print from my device (iPhone, iPod touch, iPad) using the Brother iPrint&Scan? Which E-mail packages are compatible with ControlCenter3? Why is legal scanning not an option on my Windows XP / Windows Vista computer when using the WIA driver? Vairāk
Telephone (8) Can I connect a telephone on the same line as the Brother machine in Fax/Tel Mode? Can I use voice mail on the same line as my Brother machine? I can receive a fax, but cannot receive a call. Store numbers on my Brother machine for easy dialling. Verify if the Brother machine has a dial tone What is Distinctive Ring and how do I program it? Why doesn't my Brother machine have a dial tone? Why doesn't the machine answer when receiving a call?
